PARAMOUNT MACHINE & SUMP CLEANER is designed to remove deposits of degraded coolants, oils, chips, and debris from machine surfaces, coolant sumps, and from inside coolant headers, lines, and fittings. |
| DIRECTIONS FOR USE: |
| PARAMOUNT MACHINE & SUMP CLEANER is formulated to be added to the coolant sump during production and recirculated for one shift to remove sludge accumulations prior to pump-out. The recommended use concentration from 1% to 2% by volume of the sump capacity. Coolant and cleaner solution should then be pumped out, rinsed thoroughly with water and all solids removed from the sump area. Immediately recharge with PARAMOUNT metalworking solution to protect the clean machine surfaces from rusting. Machine tools should be thoroughly cleaned every six months using the following procedure to eliminate sludge and bacterial build up. |
| * Pump the machine sump as dry as possible. Remove all solid debris and empty all clean-out ports. |
| * Fill the sump with enough water to circulate through all coolant lines. |
| * Add PARAMOUNT MACHINE & SUMP CLEANER (2 gallons concentrate to 50 gallons water. |
| * Circulate until the machine surfaces and sump area are clean. |
| * Pump cleaner solution out, remove all solid debris from sump and fill sump with enough water to circulate to rinse all lines and surfaces. |
| * Circulate for 15 minutes and then pump out. |
| * Charge immediately with PARAMOUNT metalworking fluid solution to prevent rusting of cleaned surfaces. |
| **Avoid eye splash and prolonged skin contact** |
PHYSICAL PROPERTIES |
|
| Form........................... liquid | Fire Point....... noncombustible |
| Appearance...... water white | Viscosity............ same as water |
| pH........... 10.9 at 5% conc. | pH............. (Concentrate) 12.7 |
| Odor............................ mild | Specific Gravity............... 1.03 |
| Flash Point.................. none | Solubility in Water........ 100% |
| Pour Point.......... 30ºF | |
| STORAGE AND HANDLING |
| Use at room temperature. If frozen, allow to thaw completely prior to use. Do not expose to extreme high temperature due to possible drum rupture. Do not pressurize drum or reuse empty container. |
| E-MAIL US |
| E-mail us at sales@paramountproducts.com |
